Dry magnetic mineral electrostatic drum separator for mining process

Dry magnetic mineral electrostatic roller separators for mining processOur factory produce full sets mining equipments for separating tin, gold, copper, aluminum, zircon sand, rutile ore, monazite, ilmenite, magnetic iron ore, cassiterite ore, chrome, coltan, manganese, barite ore and so on .The equipments include shaking t

Featured Products

Dry magnetic mineral electrostatic roller separators for mining process

Our factory produce full sets mining equipments for separating tin, gold, copper, aluminum, zircon sand, rutile ore, monazite, ilmenite, magnetic iron ore, cassiterite ore, chrome, coltan, manganese, barite ore and so on .
The equipments include shaking table, spiral separator, electrostatic separator, magnetic separator, trommel, dryer, ARC plate separator, flotation machine...
If you are interested in our equipments, please feel free to contact us!

Our factory produce full sets mining equipments
for different minerals separation 
ColtanDiamondZircon sand
TantalumRiver sand goldTitanium
CobaltAlluvial goldTin /Cassiterite
TungstenRock stone goldHeavy minerals sand
Tantalite placer goldChromium ore
Silica sandGold tailingMonazite 
Copper Clay gold miningTungsten ore
Barite Desert sand goldllmenite
Chrome QuartzWolfram ore
Iron oreCoalNiobium
Manganese oreSand gravelRutile
FluoriteTopsoilHematite

Dry Magnetic Mineral Electrostatic Roller Separators for Mining Process
India 200 tons per hour zircon rutile ilmenite beach sand project.

 
Beach sand main contents :
Gold, Ilmenite, Rutile, Zircon, Tin, Hematite, Magnetite, Andalusite, Quartz, Corindone, Atlri, Garnet, Monazite, etc.
 
Customer' target: remove  magnetic minerals and get the high grade rutile, tin and Zircon, more important to high recovery gold ore. 

We design the processing flowchart as below:

1. Use sand pump feed material directly to spiral separator.  If there are some bigger stones in deep areas, can consider use trommel screen to separate out particles +2mm

2. Spiral separator:  use two-stages spiral separator, first stage is for rough concentration, the middling from first-stage will go to second-stage to concentrate again to get high recovery ratio.

3. Most of the heavy fractions are magnetic minerals, so in order to remove clean as much as possible, it is better to firstly use our factory special designed four rollers wet magnetic separator to remove magnetite ilmenite and hematite and weak magnetic ore.

3. the gold and zircon and other non-magnetic minerals goes to shaking table for concentration, also use two stages shaking table for getting higher concentration effect.

4. after the electrostatic separator, can get rutile and other minerals, maybe still including some magnetic minerals, so use a high intensity dry process magnetic separator to  remove the magnetic minerals again, the zircon will be more high grade up to 66% for sale a good price. 

We design different process flowchart depends on customer's actual mining condition.
Dry Magnetic Mineral Electrostatic Roller Separators for Mining Process

 High Tension Electrostatic Separator 

High tension electrostatic separator is intended for dry separation of minerals based on the electrical conductivity difference by applying high voltage electrical field.

Typical Application
Minerals industry, recycling industry and fly ash.
It is widely used for separate ilmenite, zircon, rutile, gold, copper, leucoxene, hematite, cassiterite, chromite, columbite, aluminum, monazite, quartz, feldspar, scheelite, barite, staurolite, kyanite, sillimanite, garnet, chopped wire, plastic, electronic scrap, plastic bottle, recycling, metal, non metal, computer cable, decarburization of fly ash, caron enrichment of fly ash...

Specification and models:
ModelGELIN-ES1GELIN-ES2GELIN-ES3GELIN-ES4GELIN-ES5GELIN-ES6GELIN-ES7GELIN-ES8
Rollers qt2pcs2pcs2pcs2pcs2pcs4pcs4pcs4pcs
Roller speed0-800r/min0-800r/min0-800r/min0-800r/min0-500r/min0-500r/min0-500r/min0-500r/min
Working voltage0-45kv0-45kv0-45kv0-45kv0-45kv0-60kv0-60kv0-60kv
Feed size0-2mm0-2mm0-2mm0-2mm0-2mm0-2mm0-2mm0-2mm
Capacity0.3-1t/h0.5-2t/h1-2.5t/h1-3t/h2-3t/h1-4t/h2-5t/h4-8t/h
1) Model GELIN-ES1 electrostatic separator
The picture:
Dry Magnetic Mineral Electrostatic Roller Separators for Mining Process

1) Model GELIN-ES2 electrostatic separator
The picture:
Dry Magnetic Mineral Electrostatic Roller Separators for Mining Process
3) Model GELIN-ES3 electrostatic separator
The picture:
Dry Magnetic Mineral Electrostatic Roller Separators for Mining Process
4) Model GELIN-ES4 electrostatic separator
The picture:
Dry Magnetic Mineral Electrostatic Roller Separators for Mining Process
5) Model GELIN-ES6 electrostatic separator
The picture:
Dry Magnetic Mineral Electrostatic Roller Separators for Mining Process

7). Frequency control to adjust rollers speed electrostatic separator
Specification:
four rollers, the roll is chrome plated;
control panel box with inverter for each roller, and 1 control panel is for 1 roller;
4 pieces gear motors;
relay and protection;
The picture:
Dry Magnetic Mineral Electrostatic Roller Separators for Mining Process
Dry Magnetic Mineral Electrostatic Roller Separators for Mining Process

Our factory also produce Wet type magnetic separator & Dry type magnetic separator
Both wet type and dry typte magnetic separator's magnetic field intensity from 800 gauss up to 15000 gausss.
It is very good to separate out strong magnetic iron ore, ilmenite, titanium, hematile, monazite, tin, zircon and other weak magnetic ore.
(we produce different rollers, such as one roller, two rollers, three rollers, four rollers...):
Dry Magnetic Mineral Electrostatic Roller Separators for Mining Process

Our company & Customers Visiting

Ganzhou Gelin Mining Machinery Co., Ltd is an expert manufacturer of mining machines in China. Our company is located in Guzhang Industrial Zone, Shicheng county, Jiangxi province, covering an area of over 30000 square meters, having more than 30 sets of heavy processing equipment and with an annual outpurt of more than 2000 sets of mining machinery.
Dry Magnetic Mineral Electrostatic Roller Separators for Mining Process

--- PRE-SALE SERVICE ---

1.Based on clients' request and budget, GELIN experts will strictly make efficient, reliable solutions accordingly;

2.Mine sample testing is available, we welcome the customer send the sample to you for testing by courier, or, the customer take the sample to our factory for testing;

3. Design and provide the complete processing flowchart;

4. Design & manufacturer products according to clients' demands.

--- AFTER-SALE SERVICE ---

1.Pre-check and test the products before delivery;

2.Deliver the whole plant design for our clients which including infrastructure, electrical system and pipeline system design;

3.Trace the status of the shipping until the products received;

4.Prepare required documents to let clients pass custom clearance;

5.Dispatch experts to carry out below service on site:
1) Installation & debug of the machinery
2) Train the first-line operators & technical personnel

3) Carry out any other service clients may need

6. Provide technical exchanging & spare parts for life-long term

--- ONE STOP SOLUTION ---

1.Starting by running the mineral beneficiation experiment. To provide our clients with the best solution accordingly;

2.Besides supply the flowchart design & equipment, we also provide the infrastructure design; Electrical & pipeline system design, etc. To help our clients complete the design of the whole plant;

3.After the installation, debugging of the equipment, the official production will also be guiding by our experienced engineers on site, to guarantee the output minerals perfectly meet your demands.
Dry Magnetic Mineral Electrostatic Roller Separators for Mining Process
FAQ

Q: What Information should customers give to us in order to let we provide you with efficient & suitable quotation and assistance.

A:1). What type is the mining? Is it rock stone? or it is sand?
2). If rock stone,What is the general particle size(mm) of the raw ore?
3). What is the handling capacity(tons per hour) you plan to work with?
4).What is the elements of the raw ore? How much percent % of each minerals?

Q: Can we send the mineral samples to your company, let your company run the ore-dressing experiments test for us?

A: Yes, we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suitable solution and equipments selection. etc.

Q: How long is the warrenty of your equipments? Does your company supply the spare parts?

A: The warranty period of Gelin equipments is one year. And of course we will supply the spare parts for you for life-long time at lowest cost.

Q: If i need the complete mineral processing line. is Gelin able to help us build it?

A: Yes, we can help you combine a complete mineral processing line. and give you related professional advices as long as you need.
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service.

Welcome to visit our factory in your free time!

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours