Green Shaker Gold Roller Screening Machine Magnetic Separator Spiral Separator

Gelin shaking table gold trommel mining jigger magnetic separator spiral separatorOur factory produce both sawtooth way jig and hydraulic radial jig, we produce different size jigs for different process capacity from 1 ton per hour to 300 tons per hour per set.Our jig machine is widely used for concentrating / separating heavy m

Featured Products

Gelin shaking table gold trommel mining jigger magnetic separator spiral separator
Our factory produce both sawtooth way jig and hydraulic radial jig, we produce different size jigs for different process capacity from 1 ton per hour to 300 tons per hour per set.
Our jig machine is widely used for concentrating / separating heavy mineals sand, gold and diamond mining, tin (cassiterite), ilmenite, hematite, iron ore, zircon and rutile sand, barite, manganese, tungsten, chromite etc...
Gelin Shaking Table Gold Trommel Mining Jigger Magnetic Separator Spiral Separator
1). Large process capacity CNC Jig.
Feeding size: can handle any -30mm materials(<30mm).
Process capacity:30 tons per hour per set.
CNC adjust stroke and frequency, it is easy to handle the process speed and capacity.
Three chambers per set with only one piece 7.5kw electric motor, less electric consumption!
Gelin Shaking Table Gold Trommel Mining Jigger Magnetic Separator Spiral Separator
2). Traditional Sawtooth Wave Jig
Jig separator belongs to gravity-based equipments, which can separate mineral based on differing of specific gravity. Saw-tooth wave jig is mainly consist of three parts: Main frame, driving set and jigging chamber.

The device is suitable for sorting ferrous and nonferrous metals, chemicals, construction and metallurgical aspects of experimental research.
Gelin Shaking Table Gold Trommel Mining Jigger Magnetic Separator Spiral Separator

Working Principle Of Jig Machine
 
Jigs a kind of energy saving gravity equipment development and improved on the basis of traditional jigs according to the the oretic layering law of jig beds. Their jigging pulsation curves take the shape of sawtooth waveform which gets the ascending water to travel more rapidly than the descending water. The ascending time is short while the descending time is long. The problem that the ascending descending water flow and action time produced by sine wave and pulsation wave are the same is solved. The looseness of bed is strengthened and suction function is alleviated so that the heavy ore grains in the minerals are able to precipitate fully and the sorting ratio ability and recovery rate of equipment are largely improved.

Specification of traditional sawtooth wave jig
ModelChamberMaximum
Feeding
size(mm)
Water
added
m3/t
Pressure
of water
Mpa
Capacity
t/h
Motor
power
kw
Dimension
mm
Weight
kg
shapearea(m2)
JT0.57-1Ladder0.5761-3>=0.51-2.51.51550x780x1530610
JT1-1Ladder1.04101-32-42.22270x1110x1890900
JT1.5-2Rect1.53101-23-833200x1550x20501520
JT2-2Rect2.28101-34-833225x1550x20501640
JT3-1Ladder3.3101-36-105.53180x2000x26003260
JT4-2Rect4.33301-310-157.53600x1850x26004600
JT5-2Ladder4.86101-310-157.53600x2000x26004500
JT1.5-2SRect1.53301-33-81.5x23200x1550x20501590
JT2-2SRect2.28301-34-83x23225x1550x20501700
JT3-2SRect3301-36-155.5x23560x2030x26003260
JT4-2SRect4.33301-310-204x23600x1850x26004660
JT5-2SLadder4.86301-310-205.5x23600x2000x26004700
JT6-3SRect6301-315-307.5x24600x2000x26005900
Gelin Shaking Table Gold Trommel Mining Jigger Magnetic Separator Spiral Separator

3). Hydraulic Radial Jig

Descriptions   
   Hydraulic radial jig has been widely used as roughing separation equipment to select ore such as alluvial gold, tin, diamond, tungsten, manganese and hematite. 
   Hydraulic radial jig is developed from circular jig. It's composed of two parts: drive and tank. The drive is mechanical hydraulic type, the power is provided by motor through the transmission mechanism let the output shaft of the gear reducer drives the cam rotation, the cam pushes the piston of each master cylinder make periodic reciprocating motion, which converts electrical energy into mechanical energy and then into hydraulic energy. Through hydraulic pipes and all kinds of valves let the moving cylinder drives the cone of jig up and down fluctuation.
   Hydraulic radial jig adopts electromagnetic speed regulating asynchronous motor to realize the frequency adjustment, it's a step-less adjustment and the adjustable range of jig frequency is 0-90 times per minute. 
   Hydraulic radial jig has many advantages compared with the various jig machines: Big jigging area, big capacity; because the jig tank is fan-shaped, it is advantageous to recover fine particle materials; Compact structure, central feeding and small distribution space, suitable for use on dredger; Because of the hydraulic drive, the transmission mechanism is simplified and saving power. The total power of the same process capacity is only 11.6 Kw, saving about 55% power than the conventional jig machine in the same concentration area. The pulsation curve is approximation saw-tooth curve, not only conducive to recover fine heavy minerals, also saving a large number of make-up water, the make-up water is about a quarter of the ordinary jig.

Advantages and Characteristics
  1. Big capacity, less land occupation, wide recover range on size
  2. High concentrating ratio and high recovery
  3. Easy to install, operate and maintain
  4. The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling
  5. Saving water 60-70% and saving power 55% than the ordinary jig
  6. The pulsation speed very easily adjusted by the regulator
  7. Can achieve a good result in processing such as placer gold, tungsten, tin, hematite, manganese, barite, and gemstone etc.
Chamber3456789101112
Jigging area
(m3)
9.913.216.519.823.126.429.73.336.339.6
Stroke
(mm)
20. 25. 30
Frequency of stroke
(r/min)
50-85
Feeding size
(mm)
<25
Make-up water
(m3/t)
1-3m3/ton of ore
Make-up water pressure
(MPa)
≥0.10
Capacity
(t/h)
50-7566-10078-125100-150116-175132-197150-200166-245182-270200-300
Driving motor
(Kw)
5.57.57.57.5111111151522
hydraulic power unit
(Kw)
0.55
Weight
(kg)
600080001000012500142001580017500180001920021000

Gelin Shaking Table Gold Trommel Mining Jigger Magnetic Separator Spiral Separator

Shaking Table
Model (6S 7.6, 6S 4.08, 6S 1.95 / XS-7.6, XS-4.08, XS-1.95)


1. Describtion:
Shaking table for sale is one of the main equipments of gravity concentration. Gravity Concentration Equipment is not only widely applied on separating tungsten, the tin, the tantalum niobium and other rare metals and the noble metal ore. Also widely used in separation for Gold, Silver, Tin, Columbium, Tantalum, Titanium, Barium, Tungsten, Iron, Chrome, Manganese, Zircon, Lead, Zinc, Mercury, Copper, Aluminum, etc. The shaker effective recycling granularity scope is 2-0.037 millimeters.
 
Features:
1) High recovery ratio;
2) High concentration ratio;
3) Easy installation;
4) Simple operation;
5) Deck constructed of fiber glass;
6) Seven different decks to choose;
7) Long working life;
8) Adjustable stroke length and speed.
Gelin Shaking Table Gold Trommel Mining Jigger Magnetic Separator Spiral Separator
2. Working Principle:
The working principle of shaking table for sale is to use the combined action of the specific gravity difference of sorted minerals, alternating movement of bed surface, and transverse oblique water flow and riffle (or notch groove), to allow loose layering of ores on the bed surface and fan-shaped zoning. Then different products can be produced.
 
1). Made by 6s firber glass material; 
2). Steel structure support, easy to install and move to other place; 
3). High recovery ratio, as usual more than 90% recovery ratio. 
 
As per different particle size of raw ore, there are three distinct deck design available. The course ore deck is Designed for recovering particle size from 0.5mm to 2mm; The fine sand deck is designed for recovering fine particle From 0.15mm to 0.5mm; The slime deck is designed for recovering super extremely fine particle in the range of 0.074mm to 0.15mm. 

3. Technical Data:
Model6s-7.66s-4.086s-1.956s-0.5
Deck typeCoarse ore deckFine sand deckSlime deck   
Benefication Area(m2)7.67.67.64.081.950.5
Deck sizeLength(mm)445044504450300021001100
Transmission end width (mm)18551855185513201050500
Concentrate end width (mm)154615461546110850430
Maximum feeding size(mm)20.50.15Sand -2 Slime-0.1Sand -2 Slime-0.074Sand -2 Slime-0.074
Feeding amount0.8-1.5ton/h0.8-1.5ton/h0.8-1.5ton/h0.4-1.5t/h0.3-0.8t/h0.05-0.2t/h
Feeding density(%)25-3020-2515-2510-30
Stroke(mm)16-2211-168-166-3012-289-17
Frequency(F)45-22053-25060-280210-320250-450280-460
Water added1-3t/h1-3t/h1-3t/h0.4-2t/h0.2-1t/h0.1-0.5t/h
Transverse slope of deck2°30-4°301°30-3°301°-2°0-10°0-8°0-10°
Longitudinal slope of deck1.40.92------------
Cross-section shape of deckrectangularsaw-toothtriangle---------
Motor power(kw)1.10.55
Transmission mechanismEccentric linkage

Our factory not only produce the big equipments for large mining, but also produce small equipments for small scale mining and high school, university laboratory testing!
1). Small Mobile Gold Trommel
This machine is used for washing and separating diamond mining, alluvial gold mining, placer gold, river sand gold etc.
Gelin Shaking Table Gold Trommel Mining Jigger Magnetic Separator Spiral Separator

2). Small Jaw Crusher:

It is applicable to medium and fine crushed materiails for the purposes of laboratory and production and primarily provided as environmental protection equipment for coal, electric power, mine, geology, chemical, metallurgy, building material and other industries. The product is produced by the only erterprise designated by the former minis of Geology and Mineral Resources, in compliance with the Industrial standards.
Gelin Shaking Table Gold Trommel Mining Jigger Magnetic Separator Spiral Separator

3). Small Ball Mill:
XMQ Series Cone Ball Mill is a lab. Grinding equipment for wet fine grinding of ore (150 × 50 Cone Ball Mill also can be used for dry grinding). It is applied in labs for processing and fine grinding of artificial placer materials and ores in metallurgical, building material, chemical, light, coal, water conservancy, electric power, agricultural and geological industries.
Gelin Shaking Table Gold Trommel Mining Jigger Magnetic Separator Spiral Separator

4). Small Flotation Cell:
XFD Series Single Flotation Cell is provided for flotation of minor ore samples in labs of geological, metallurgical, chemical and other industries. The product is produced by the only enterprise designated by the former Ministry of Geology and Mineral Mineral Resources, in compliance with the Industrial standards
XFD second-generation new product has a variable frequency technology, digital display, adjust the precise, reliable operation and so on.
XFD third-generation new product has a variable frequency technology, digital display, adjust the precise, reliable operation characteristics, and the other heat pipes, temperature control device, at any time control, display tank mine fluid temperature, plus automatic adjustment of fill with water, automatic drug delivery devices

5). Small Magnetic Separator:
Our factory produce both wet type mangetic separator and dry type magnetic separator.

Magnetic Separation Machines for metal mineral processing laboratory, mining engineering experiment, the middle experimental plant, which uses fine-grained wet method magnetic ore separator, only a small amount of sample can be tested technical indicators of mineral iron content. Separator small size, easy to operate. The device is not suitable for beneficiation test with a corrosive liquid. This product is the only designated former Ministry of Geology and Mineral production, the implementation of industry standards.
Gelin Shaking Table Gold Trommel Mining Jigger Magnetic Separator Spiral Separator

6). Small High Tension Electrostatic Separator:
It is an dry separating equipment in the high voltage electric field.
High voltage electricity separator is an dry separating equipment in the high voltage electric field, which eliminate the mineral according to the differences of materials electricity nature.
The selection of the Non-ferrous metal and black metal, such as iron ore, zircon, primary limonite, beach placer, manganese ore, titanium, tantalum, niobium, tin, monazite, and primary retiles.
The separation of impurity mineral which associated with feldspar and quartz.
Gelin Shaking Table Gold Trommel Mining Jigger Magnetic Separator Spiral Separator
 

4. About Us:
Ganzhou Gelin Mining Machinery Co., Ltd is an expert manufacturer of mining machines in China. Our company is located in Guzhang Industrial Zone, Shicheng county, Jiangxi province, covering an area of over 30000 square meters, having more than 30 sets of heavy processing equipment and with an annual outpurt of more than 2000 sets of mining machinery.

---Experienced Mining Machinery Manufacturer---

Our distinctive prodcts include shaking table, Jig, Spriral separator, Gold concentrator, Ball mill, Jaw crusher, flotation, magnetic separator, feeder, classifier, ore washing machine and lab equipment ect. Our machines are popular in separating GOLD, copper, manganes, chrome, tungsten, tin, nickel, iron, titanium, lead, zinc, tantalum and some non-ferrous metals like quart, zircon, barite,ect.

Gelin Shaking Table Gold Trommel Mining Jigger Magnetic Separator Spiral Separator

--- PRE-SALE SERVICE ---

1) Based on clients' request and budget, GELIN experts will strictly make efficient, reliable solutions accordingly;
2) Mine sample testing is available, we welcome the customer send the sample to you for testing by courier, or, the customer take the sample to our factory for testing;
3) Design and provide the complete processing flowchart;
4) Design & manufacturer products according to clients' demands.

--- AFTER-SALE SERVICE ---

1) Pre-check and test the products before delivery;
2) Deliver the whole plant design for our clients which including infrastructure, electrical system and pipeline system design;
3) Trace the status of the shipping until the products received;
4) Prepare required documents to let clients pass custom clearance;
5) Dispatch experts to carry out below service on site:
      1) Installation & debug of the machinery
      2) Train the first-line operators & technical personnel
      3) Carry out any other service clients may need

6)  Provide technical exchanging & spare parts for life-long term

--- ONE STOP SOLUTION ---

1) Starting by running the mineral beneficiation experiment. To provide our clients with the best solution accordingly;
2) Besides supply the flowchart design & equipment, we also provide the infrastructure design; Electrical & pipeline system design, etc. To help our clients complete the design of the whole plant;
3) After the installation, debugging of the equipment, the official production will also be guiding by our experienced engineers on site, to guarantee the output minerals perfectly meet your demands.

5. FAQ:

Q: What Information should customers give to us in order to let we provide you with efficient & suitable quotation and assistance.

 A:1). What type is the mining? Is it rock stone? or it is sand?
    2). If rock stone,What is the general particle size(mm) of the raw ore?
    3). What is the handling capacity(tons per hour) you plan to work with?
    4).What is the elements of the raw ore? How much percent % of each minerals?

Q: Can we send the mineral samples to your company, let your company run the ore-dressing experiments test for us?

A: Yes, we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suitable solution and equipments selection. etc.

Q: How long is the warrenty of your equipments? Does your company supply the spare parts?

AThe warranty period of Gelin equipments is one year. And of course we will supply the spare parts for you for life-long time at lowest cost.

Q: If i need the complete mineral processing line. is Gelin able to help us build it?

A: Yes, we can help you combine a complete mineral processing line. and give you related professional advices as long as you need.
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service.


6. Welcome To Visit Our Factory!
Till now, our machines are exported to over 60 countries, such as United States, Canada, Peru, Brazil, Russia, England, Spain, Sudan, Morocco, Cote d'lvorie, Ghana, Congo, Mali, Zimbabwe, South Africa, Mozambique, Cameroon, Tanzania, Kenya, Angolia, India, Malaysia, Philippines, Indonesia, Australia, New Zealand, Mongolia, Myanmar etc...
                                              Looking Forward To Your Joinning!!!

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours