Gravity separator Jigger belongs to gravity-based equipments, which can separate mineral based on differing of specific Gravity. Saw-tooth wave jig is mainly consist of three parts: Main frame, driving set and jigging chamber.
Gravity separator Application
Gravity separator is widely used in gravity concentration of tin, tungsten, placer gold, hematite ore, manganese, titanium, Antimony, lead, tantalum, niobium and other minerals.
Gravity separator Features
The pulsing curve of the traditional jig is sinusoidal waveform, the up and down speed of water flow and acting time produced by the movement of membrane are almost same, so it is unfavorable to loose of jig bed and layering of Minerals based on special gravity, and thus affect separation ability and recovery rate. Saw-tooth wave is an energy Economy gravity equipment that is developed and improved from traditional jig on the basis theory of jig bed layering.
Its jigging pulsating curve is similar to saw-tooth wave, which makes the up speed of water flow quicker than down Speed of water flow, so it can improve looseness of jig bed and reduce suction action, which can lead to fully settlement Of heavy particles in slurry, it highly improves separation ability and recovery rate. Stroke and frequency of stroke are Adjustable.
Application of Gravity separator
Gravity separator is applied to process gold, wolframite, lead, tin, manganese, iron, etc, especially used in gold processing line. It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation. It is also used to recover gold from the old tailings.
Gravity separator parameters:
Gravity separator Application
Gravity separator is widely used in gravity concentration of tin, tungsten, placer gold, hematite ore, manganese, titanium, Antimony, lead, tantalum, niobium and other minerals.
Gravity separator Features
The pulsing curve of the traditional jig is sinusoidal waveform, the up and down speed of water flow and acting time produced by the movement of membrane are almost same, so it is unfavorable to loose of jig bed and layering of Minerals based on special gravity, and thus affect separation ability and recovery rate. Saw-tooth wave is an energy Economy gravity equipment that is developed and improved from traditional jig on the basis theory of jig bed layering.
Its jigging pulsating curve is similar to saw-tooth wave, which makes the up speed of water flow quicker than down Speed of water flow, so it can improve looseness of jig bed and reduce suction action, which can lead to fully settlement Of heavy particles in slurry, it highly improves separation ability and recovery rate. Stroke and frequency of stroke are Adjustable.
Application of Gravity separator
Gravity separator is applied to process gold, wolframite, lead, tin, manganese, iron, etc, especially used in gold processing line. It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation. It is also used to recover gold from the old tailings.
Gravity separator parameters:
| Model | JT-0.57 | JT1-1 | JT2-2 | JT3-1 | JT4-2 | JT5-2 | ||
| Jigging Chamber | Section Form | Trapezium | Trapezium | Rectangle | Trapezium | Rectangle | Trapezium | |
| Length*Width(mm) | 450~750×950 | 450~900×1500 | 1070×1070 | 960~2000×1950 | 1510×1510 | 1200~2000×3150 | ||
| Column Number | Single | Single | Single | Single | Single | Single | ||
| Jig Chambers(psc) | 1 | 1 | 2 | 1 | 2 | 2 | ||
| Single chamber area (m²) | 0.57 | 1 | 1.14 | 3.3 | 2.43 | 2.12(single chamber) 2.77(double chamber) | ||
| Total area(m²) | 0.57 | 1 | 2.28 | 3.3 | 4.86 | 5 | ||
| Stroke Coefficient | 0.57 | 0.64 | 0.45 | 1 | 0.58(single power) 0.45(dual power) | 0.58(single power) 0.45(dual power) | ||
| Max feed size(mm) | 6 | 5 | 10 | <20 | 8, plus sieve automatic discharge <60 | 8, plus sieve automatic discharge <60 | ||
| Capacity(t/h) | 1~2.5 | 2~3 | 4~8 | 10~15 | 12~16 | 10~20 | ||
| Water Consumption(m³/h) | 1~2 | 2~3 | 2~4 | 3~6 | 4~8 | 5~10 | ||
| Separator | Stroke(mm) | 12,17,21 | 12,17,21 | 12,17,21 | 10~47 adjustable | 10~30 | 15,20,25 | |
| Jig frequency(min-1) | 60~156 adjustable | 60~156 adjustable | 60~156 adjustable | 80~100 adjustable | 80~120 adjustable | 80~120 adjustable | ||
| Motor | Model | YCT 132-4B | YCT 100L-6 | YCT32-4 | YCT-4B | YCT 160-4B | YCT 200-4A | |
| Power (kw) | 1.5 | 2.2 | 3 | 5.5 | 5.5 (dual power) 7.5 (single power) | 5.5 (dual power) 7.5 (single power) | ||
| Overall Dimension(Length*Width*Height)mm | 1530×780×1550 | 2060×1112×1890 | 2870×1520×1880 | 2662×2000×3030 | 4240×1990×2750 | 3940×2006×2580 | ||
| Weight(kg) | 612 | 989 | 1637 | 3260 | 3500 | 3854 | ||
| Notes: The above data is only for your reference, capacity and hutch water varying from ore granularity, ore property and operating condition. | ||||||||